Why Do Playground Designers Favour Wet Pour?
It follows curves and organic shapes that tiles cannot, and never lifts at a seam.
EPDM Flooring
Intex Aura supplies and installs seamless wet pour EPDM rubber flooring for playgrounds, running tracks, school play areas, pool surrounds, rooftops and outdoor gyms across Dubai. Each surface is installed to suit the height of your play equipment, poured in the colours you choose and laid to drain.
5.0 on Google · 25 Years of Experience · Free Site Visit
EPDM stands for ethylene propylene diene monomer, a durable synthetic rubber that is non-toxic and weather resistant. Wet pour is mixed, poured and trowelled on site as a two-layer system with no joins.
The base layer is recycled SBR rubber granules bound with polyurethane binder and works as the shock absorber. On top, the wear layer of coloured EPDM granules, usually 10 to 15 mm thick, adds grip, colour and durability.
It follows curves and organic shapes that tiles cannot, and never lifts at a seam.
From hotel groups to airlines, well-known names have trusted us with their floors.

Impact zones under slides, swings and climbing frames.

Jogging loops and sprint lanes with lines poured in, for comfort underfoot.

Colour zones for kids at schools and nurseries, with depth set to EN 1177 fall heights.
Slip resistant when wet, installed beside pools and splash pads in villas and hotels.

Light, draining surfaces for rooftops and residential or commercial podium decks.
Safe footing, impact protection and less noise under outdoor gyms and calisthenics frames.
Two-tone patterns, games, number lines and club logos, poured as graphics through the full depth of the wear layer so they never peel like paint.
01
Shock absorption sized to each frame.
02
Drainage runs straight through the surface.
03
UV-stable mixes resist fading.
04
One continuous pour, edge to edge.
Our Process
We check the substrate, levels, drainage and access.
Each free height of fall sets the thickness schedule.
Colours, designs and graphics drawn up for your approval.
Concrete is cleaned and primed, or a compacted sub-base built.
SBR trowelled to depth, then the EPDM top and inlays.
Left to cure, then handed over with care advice.
Why Choose Us
Why schools, compounds and villas call us for poured rubber:
Equipment heights come first, because they decide the depth.
Your quote says whether the top uses aliphatic or aromatic binder.
Installation is timed for cooler hours in summer conditions.
Weekend and holiday installation for schools and commercial gyms.
From Jumeirah Village Circle and Al Furjan to Mirdif and Silicon Oasis.
Free site visit, then a written, itemised quote.
Contact Us
Send a photo of the area and its equipment, and our flooring team will arrange a visit.
Testimonials
Safety
Critical fall height is the highest fall onto a surface that should not cause a serious head injury. It is tested to EN 1177, one of the playground standards consultants cite, and it must equal or exceed the free height of fall of the equipment above. As a typical guide, 20 to 25 mm suits a 1 m fall, rising to 100 mm or more above 3 m.
EN 1177 rates the impact performance of the whole tested system, meaning granules, binder, base layer and substrate together, not thickness alone. We confirm the build-up for your equipment in writing, so the safety requirements are clear before installation.
Climate
EPDM granules are UV resistant, so the binder decides how the colours age. Aromatic polyurethane costs less but ambers in strong sun, dulling brights within a couple of summers. Aliphatic binder gives far better colour stability and appearance, so we recommend it for exposed playground flooring, tracks and rooftops. Lighter colours also stay cooler in peak heat.
Care
Compare
EPDM rubber flooring also comes as tiles and rolls. Tiles suit indoor gyms and are quick to install, but outdoors their joins can open. Wet pour is durable, has no seams, takes any shape and drains evenly, which is why it leads for playground projects and tracks. Anyone comparing EPDM flooring UAE contractors offer should ask about binder, depth and base, as these set performance and budget.
Any outdoor surface warms in direct sun, dark rubber most. Light colours, shade sails and play at cooler hours keep it safe and comfortable.
Usually the binder. Aromatic polyurethane suits indoor areas but fades under UV, while aliphatic keeps colours bright for years.
Often, yes, if the substrate is sound and drains. Cracked areas are repaired first, because the poured surface copies what lies beneath.
No. Wet pour is porous, so rain soaks through to the substrate and runs off along its falls. Regular sweeping keeps the pores open.
Yes. Logos, letters and other graphics are poured as part of the top layer. The colour runs through its depth, so they outlast painted designs.
Rarely. Worn spots can be cut out and re-poured, although colour matching a patch on an aged surface is never exact.
The surface must cure, and heat and humidity change how long that takes. Light use is typically possible after 24 to 48 hours, though timings vary by job.
On small areas it usually is. Cost depends on area, thickness, colours, graphics, binder type and substrate condition, and we price residential and commercial jobs in writing after a free visit.
Our Collection
Recent EPDM flooring Dubai projects include villa play corners, compound playgrounds and rooftop sprint lanes. Time on site for a play area depends on its size, and we'll confirm it after the site visit.
Our office
Office 1-137, 1st Floor
Al Masraf Bank Building
Al Qouz 1, Sh. Zayed Road
Dubai